What neck connector do you use for a 11cm Obitsu and...

[Lamia of the Dark]

LPS Blythe?

Cause I have and LPS Blythe that I would like to rebody on a bitty bitsu, but the default neck connector doesn't work with that head.

Does anyone know?

[Greyhaunt]

see if you can find a tutorial on putting a little pullip head on a 11cm obitsu, they should be similar.

[Lamia of the Dark]

see if you can find a tutorial on putting a little pullip head on a 11cm obitsu, they should be similar.

No, a Littlest Pet Shop Blythe, not a Little Pullip/Dal.

She has a soft vinyl 1-piece head, but the neck hole is an odd size that doesn't match anything I've put on a bitty bitsu before.

[Evelien]

I know *someone* put an LPS Blythe head on an 11cm Obitsu here... Who was it... Almy..?

[Alopecia No Hime]

Yeah that was Almy!

Hmm maybe just take the default connector off and try popping the head on?

[Lamia of the Dark]

*lightbulb goes off over head*

I don't about Almy, but absynthe has one. I'll shoot her a PM.

[Nunubit]

Oh oh, I have a LPS Blythe head on a bitty bitsu! The normal connector "works" but you need to head the head up with a hair dryer. It won't fit perfectly, and if you want to take it off, make sure you heat it up thoroughly, as I didn't once while dressing her, and part of the neck got stuck in the head and had to be pulled out with pliers. All in all, um, head it up. A lot.

[Lamia of the Dark]

Oh oh, I have a LPS Blythe head on a bitty bitsu! The normal connector "works" but you need to head the head up with a hair dryer. It won't fit perfectly, and if you want to take it off, make sure you heat it up thoroughly, as I didn't once while dressing her, and part of the neck got stuck in the head and had to be pulled out with pliers. All in all, um, head it up. A lot.

I don't own a hair dryer @__@

I have discovered that LPS Blythe heads pop onto MH CAM bodies pretty easily... because they have the same ball-type neck connector.